Intel B940 Datasheet Page 356

  • Download
  • Add to my manuals
  • Print
  • Page
    / 360
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 355
Intel
®
QuickPath Architecture System Address Decode Register Description
356 Datasheet, Volume 2
3.7 Intel
®
QPI Link Registers
3.7.1 QPI_QPILCL_L0, QPI_QPILCL_L1
This register provides Intel QPI Link Control.
Device: 2
Function: 0
Offset: 48h
Access as a Dword
Bit Type
Reset
Value
Description
31:22 RV 0 Reserved
21 RW 0
L1_MASTER
This bit indicates that this end of the link is the L1 master. This link
transmitter bit is an L1 power state master and can initiate an L1 power
state transition. If this bit is not set, then the link transmitter is an L1
power state slave and should respond to L1 transitions with an ACK or
NACK.
If the link power state of L1 is enabled, then there is one master and
one slave per link. The master may only issue single L1 requests, while
the slave can only issue single L1_Ack or L1_NAck responses for the
corresponding request.
20 RW 0
L1_ENABLE
This bit enables L1 mode at the transmitter. This bit should be ANDed
with the receive L1 capability bit received during parameter exchange to
determine if a transmitter is allowed to enter into L1. This is NOT a bit
that determines the capability of a device.
19 RV 0 Reserved
18 RW 0
L0S_ENABLE
This bit enables L0s mode at the transmitter. This bit should be ANDed
with the receive L0s capability bit received during parameter exchange
to determine if a transmitter is allowed to enter into L0s. This is NOT a
bit that determines the capability of a device.
17:0 RW 0 Intel Reserved
Page view 355
1 2 ... 351 352 353 354 355 356 357 358 359 360

Comments to this Manuals

No comments