Intel LF80537GG0252M Datasheet download pdf (Page 32)

Electrical Specifications

32 Datasheet

2. Excessive overshoot or undershoot on any signal will likely result in permanent damage to

the processor.

3. Storage temperature is applicable to storage conditions only. In this scenario, the

processor must not receive a clock, and no lands can be connected to a voltage bias.

Storage within these limits will not affect the long-term reliability of the device. For

functional operation, please refer to the processor case temperature specifications.

4. This rating applies to the processor and does not include any tray or packaging.

5. Failure to adhere to this specification can affect the long-term reliability of the processor.

6. For Intel® Core™2 Duo mobile processors in 22x22 mm package.

3.10 Processor DC Specifications

The processor DC specifications in this section are defined at the processor

core (pads) unless noted otherwise.

The tables list the DC specifications for the processor and are valid only while meeting

specifications for junction temperature, clock frequency, and input voltages. The

Highest Frequency Mode (HFM) and Lowest Frequency Mode (LFM) refer to the highest

and lowest core operating frequencies supported on the processor. Active mode load

line specifications apply in all states except in the Deep Sleep and Deeper Sleep states.

CC,BOOT

is the default voltage driven by the voltage regulator at power up in order to

set the VID values. Unless specified otherwise, all specifications for the processor are at

= 105 °C. Read all notes associated with each parameter.

Table 6. Voltage and Current Specifications for the Dual-Core, Extreme Edition

Processors (Sheet 1 of 2)

Symbol Parameter Min Typ Max Unit Notes

CCDAM

in Enhanced Intel® Dynamic Acceleration

Technology Mode

1.0 1.325 V 1, 2

CCHFM

at Highest Frequency Mode (HFM) 1.0 — 1.275 V 1, 2

CCLFM

at Lowest Frequency Mode (LFM) 0.85 — 1.1 V 1, 2

CCSLFM

at Super Low Frequency Mode

(Super LFM)

0.8 — 1.0 V 1, 2

CC,BOOT

Default V

Voltage for Initial Power Up — 1.20 V 2, 6

CCP

AGTL+ Termination Voltage 1.00 1.05 1.10 V

CCA

PLL Supply Voltage 1.425 1.5 1.575 V

CCDPRSLP

at Deeper Sleep 0.65 — 0.85 V 1, 2

DC4

at Intel® Enhanced Deeper Sleep State 0.6 — 0.85 V 1, 2

CCDPPWDN

at Deep Power Down Technology State

(C6)

0.35 — 0.7 V

CCDES

for Processors Recommended Design

Targ e t

——60A12

for Processors — — —

Processor

Number

Core Frequency/Voltage — — —

X9100 3.06 GHz & V

CCHFM

1.6 GHz & V

CCLFM

0.8 GHz & V

CCSLFM

——

A 3, 4, 10

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 112 113

Comments to this Manuals

No comments

Intel LF80537GG0252M Datasheet Page 32

Comments to this Manuals

Related products and manuals for Processors Intel LF80537GG0252M