Intel ISP1100 User Manual download pdf (Page 30)

30 Intel ISP1100 Internet Server Product Guide

Installing the Processor Chip

Perform this procedure to install the processor chip in the socket. Refer to Figure 10 while

performing this procedure.

1. Grasp the end of the zero-insertion-force (ZIF) arm (A) and bend it out slightly until it

disengages from the socket tab (B).

2. Swing the ZIF arm up until it stops in the straight up position. The processor socket is now

unlocked.

3. Face the front of the server and orient the processor chip (C) with the notch (D) in the upper left

corner of the processor socket (E).

4. Gently place the processor chip on the socket so that the processor pins (F) mate exactly with

the corresponding socket pins (G). Do not force the processor into the socket since it takes

only a slight pressure to bend the pins.

5. With the processor in place, swing the arm (A) down until it snaps into the socket tab (B). The

processor is now properly socketed.

OMO9431

Figure 10. Installing the Processor Chip

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 80 81

No comments

Intel ISP1100 User Manual Page 30