Intel ISP1100 User Manual download pdf (Page 23)

Removing/Installing Server Components 23

Rackmount Precautions

Familiarize yourself with the following precautions before rackmounting the server.

WARNINGS

ANCHOR THE EQUIPMENT RACK: The equipment rack must be anchored

to an unmovable support to prevent it from falling over when one or

more devices are extended in front of it on slide assemblies. The anchors

must be able to withstand a force of up to 113 kg (250 lbs.). You must

also consider the weight of any other device installed in the rack.

AIN AC POWER DISCONNECT: You are responsible for installing an

AC power disconnect for the entire rack unit. This main disconnect

must be readily accessible, and it must be labeled as controlling power to

the entire unit, not just to the server(s).

ROUNDING THE RACK INSTALLATION: To avoid the potential for

electrical shock, you must include a third wire safety grounding

conductor with the rack installation. If server power cords are plugged

into AC outlets that are part of the rack, then you must provide proper

grounding for the rack itself. If server power cords are plugged into

wall AC outlets, the safety grounding conductor in each power cord

provides proper grounding only for the server. You must provide

additional, grounding for the rack and other devices installed in it.

OVERCURRENT PROTECTION: The server is designed for an AC

line voltage source with up to 20 amperes of overcurrent protection. If

the power system for the equipment rack is installed on a branch circuit

with more than 20 amperes of protection, you must provide

supplemental protection for the server. If more than one server is

installed in the rack, the power source for each server must be from a

separate branch circuit.

CAUTIONS

TEMPERATURE: The operating temperature of the server, when installed

in an equipment rack, must not go below 5 °C (41°F) or rise above 35 °C

(95 °F). Extreme fluctuations in temperature can cause a variety of server

problems.

VENTILATION: The equipment rack must provide sufficient airflow to the

front of the server to maintain proper cooling. There must be sufficient

ventilation to exhaust at least 1,500 BTU per hour for each server. The rack

selected and the ventilation provided must be suitable to the environment in

which the server will be used.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 80 81

No comments

Intel ISP1100 User Manual Page 23