Intel SDS2 User Manual download pdf (Page 66)

BIOS Intel® Server Board SDS2

Revision 1.2

Order Number: A85874-002

Code Reason for Beep

1-5-1-1 FRB failure (processor failure)

1-5-2-1 Empty Processor

1-5-2-2 No Processor

1-5-2-3 Processor configuration error (e.g., mismatched VIDs)

1-5-4-2 Power fault: DC power unexpectedly lost (power control failures)

1-5-4-3 Chipset control failure

1-5-4-4 Power control fault

6.3 Setup Utility

This section describes the ROM resident Setup utility that provides the means to configure the

platform. The Setup utility is part of the system BIOS and allows limited control over on-board

resources such as parallel port and mouse. The following topics are covered here:

• Setup utility operation.

• Configuration CMOS RAM definition.

• Function of CMOS clear jumper.

6.3.1 Configuration Utilities Overview

On-board devices are configured through the Setup utility that is embedded in flash ROM. Setup

provides enough configuration functionality to boot a system diskette or CD-ROM. Setup is

always provided in flash for basic system configuration.

The configuration utilities modify the CMOS and NVRAM under direction of the user. The actual

hardware configuration is accomplished by the BIOS POST routines and the BIOS Plug-N-Play

Auto-configuration Manager. The configuration utilities always update a checksum for both areas,

so that any potential data corruption is detectable by the BIOS before actual hardware

configuration takes place. If the data is corrupted, the BIOS load the default configuration and

requests that the user reconfigure the system and reboot.

6.3.2 Setup Utility Operation

The ROM-resident Setup utility configures only on-board devices.

The Setup utility screen is divided into four functional areas. Table 31 describes each area:

Table 31. Setup Utility Screen

Keyboard Command Bar Located at the bottom of the screen. This bar displays the keyboard commands

supported by the Setup utility.

Menu Selection Bar Located at the top of the screen. Displays the various major menu selections

available to the user. The server Setup utility major menus are: Main Menu, Advanced

Menu, Security Menu, System Menu, Boot Menu, and the Exit Menu.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 144 145

No comments

Intel SDS2 User Manual Page 66