Intel BX80569QX6850 Datasheet Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
Datasheet 25
Electrical Specifications
NOTES:
1. The loadline specification includes both static and transient limits except for overshoot
allowed as shown in Section 2.6.3.
2. This loadline specification shows the deviation from the VID set point.
3. The loadlines specify voltage limits at the die measured at the VCC_SENSE and
VSS_SENSE lands. Voltage regulation feedback for voltage regulator circuits must be taken
from processor VCC and VSS lands. Refer to the Voltage Regulator-Down (VRD) 11.0
Processor Power Delivery Design Guidelines For Desktop LGA775 Socket for socket loadline
guidelines and VR implementation details.
2.6.3 V
CC
Overshoot
The processor can tolerate short transient overshoot events where V
CC
exceeds the VID
voltage when transitioning from a high to low current load condition. This overshoot
cannot exceed VID + V
OS_MAX
(V
OS_MAX
is the maximum allowable overshoot voltage).
The time duration of the overshoot event must not exceed T
OS_MAX
(T
OS_MAX
is the
maximum allowable time duration above VID). These specifications apply to the
processor die voltage as measured across the VCC_SENSE and VSS_SENSE lands.
Figure 2. V
CC
Static and Transient Tolerance for Processors with 2 MB L2 Cache
VID - 0.000
VID - 0.013
VID - 0.025
VID - 0.038
VID - 0.050
VID - 0.063
VID - 0.075
VID - 0.088
VID - 0.100
VID - 0.113
VID - 0.125
VID - 0.138
VID - 0.150
VID - 0.163
VID - 0.175
0 10203040506070
Icc [A]
Vcc [V]
Vcc Maximum
Vcc Typical
Vcc Minimum
Table 8. V
CC
Overshoot Specifications
Symbol Parameter Min Max Unit Figure Notes
V
OS_MAX
Magnitude of V
CC
overshoot above VID 50 mV 3
1
NOTES:
1. Adherence to these specifications is required to ensure reliable processor operation.
T
OS_MAX
Time duration of V
CC
overshoot above VID 25 μs 3
1
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 121 122

Comments to this Manuals

No comments