Intel BLADE SERVER IXM5414E User Manual Page 271

  • Download
  • Add to my manuals
  • Print
  • Page
    / 303
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 270
248 Intel® Blade Server Ethernet Switch Module IXM5414E: Installation and User’s Guide:A Guide for Technically
config lag addport lag.1 ext.1
config lag addport lag.1 ext.2
config lag addport lag.2 ext.3
config lag addport lag.2 ext.4
Enable both LAGs.
config lag adminmode lag.1,lag.2 enable
The previous command could have been issued instead as:
config lag adminmode all enable
IGMP snooping configuration example
This section provides sample CLI commands showing how to configure the Intel® Blade Server
Ethernet Switch Module IXM5414E to support IGMP Snooping. Activating IGMP Snooping allows
you to restrict the forwarding of multicast packets to network segments that need to see the packets.
The switch uses information gained from examining IGMP packets to decide how to forward
multicast packets.
You can activate IGMP Snooping for both individual and aggregated physical interfaces. The script
in the following example show you how to configure IGMP Snooping.
Enable IGMP Snooping on the switch.
config igmpsnooping adminmode enable
IGMP Snooping will be enabled with default values for the group membership interval,
maximum response and multicast router present expiration timers. This command overrides the
default for the multicast router present expiration timer.
config igmpsnooping mcrtrexpiretime 2400
Enable IGMP Snooping for a set of physical ports and for a LAG.
config igmpsnooping interfacemode bay.1,bay.2,bay.3,bay.4 enable
config igmpsnooping interfacemode lag.1 enable
To display information about the IGMP Snooping configuration issue:
show igmpsnooping
To display information about all multicast addresses issue:
show mfdb table all
Access Control List configuration example
This section provides sample CLI commands showing how to configure the Intel® Blade Server
Ethernet Switch Module IXM5414E to support Access Control Lists (ACLs). ACLs offer one way
of adding Quality of Service support to your network.
You define an ACL to control who can use your network or network resources by allowing or
prohibiting access. The ACL specifies one or more match criteria that will be used to determine
whether a given packet will be admitted to the network. The first match criteria met by a packet
Page view 270
1 2 ... 266 267 268 269 270 271 272 273 274 275 276 ... 302 303

Comments to this Manuals

No comments