Intel RAID AXXRSBBU6 User Manual

Intel® RAID Smart Battery AXXRSBBU6 User’s Guide Order Number: E33722-001

6Caution: Center the screwdriver carefully to avoid stripping the screwhead. Do not over-tighten the screws. The maximum recommended torque is 2.2

7 Monitoring Battery Backup Multiple utilities are available to display and configure BBU information including recharge count. When you replace

8Most of the Battery Module properties are view-only. In the lower right panel of the RAID BIOS Console there are two properties that can be chang

9• The current BBU temperature, voltage, current, and remaining capacity • The estimated time until the battery is fully charged (only if the b

10Battery Backup Unit Specifications Table 1. Battery Backup Unit Specifications Battery Technology LiON (Lithium ION) 1 cell Battery Operating

ii Warranty Notice: Adding a battery on an Intel RAID controller will limit the warranty of this product. Returns determined to be

iii Contents List of Figures... iv List of Table

ivList of Figures Figure 1. Top and Bottom View of the AXXRSBBU6...3 Figure 2. Bat

1 Intel® RAID Smart Battery User’s Guide About the Intel® RAID Smart Battery Intel® RAID Controllers and Intel® Integrated Server RAID Modules prov

2 Intel® RAID Smart Battery User’s Guide Important Safety Instructions Read all caution and safety statements in this document before performing any

3 Installing the AXXRSBBU6 Figure 1 displays the top and bottom views of the AXXRSBBU6. The battery pack is mounted on a daughtercard which mounts

4Important Pre-installation Considerations Warning: Always ground yourself and/or use a ground strap before touching the RAID controller or the RS

54. Remove the protective metal cover from the battery connector on the RAID controller card. (J10 on the Intel® SRCSASBB8I and Intel® SRCSASLS4I