Intel BLADE SERVER IXM5414E User Manual Page 230

  • Download
  • Add to my manuals
  • Print
  • Page
    / 303
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 229
Command Line Interface Management 207
User A list of all users with an assigned login list.
System login
The authentication login list assigned to the user for system login.
802.1X The authentication login list assigned to the user for IEEE 802.1X port security.
IEEE 802.1X commands
clear dot1x port stats
Use this command to reset the IEEE 802.1X statistics for the specified port(s).
Format clear dot1x port stats <port/all>
config dot1x adminmode
Use this command to enable or disable authentication support on the switch. The default value is
disable. In disabled mode, the dot1x configuration is retained and can be changed, but it is not
activated.
Default disable
Format config dot1x adminmode <enable/disable>
config dot1x defaultlogin
Use this command to assign the authentication login list to use for non-configured users for IEEE
802.1X port security. This setting is overridden by the authentication login list assigned to a specific
user if the user is configured locally. If this value is not configured, users will be authenticated using
local authentication only.
Format config dot1x defaultlogin <listname>
config dot1x login
Use this command to assign the specified authentication login list to the specified user for port
security. The <user> must be a configured user and the <listname> must be a configured login list.
Format config dot1x login <listname>
config dot1x port controlmode
Use this command to configure the authentication mode to be used on the specified port or ports.
The control mode may be one of the following:
forceunauthorized
The authenticator Port Access Entity (PAE) unconditionally sets the controlled
port(s) to unauthorized mode
forceauthorized
The authenticator PAE unconditionally sets the controlled port(s) to authorized
mode
auto The authenticator PAE sets the controlled port(s) mode to reflect the result of the
authentication exchanges between the supplicant, authenticator and authentication
server.
Default auto
Format config dot1x port controlmode <port/listofports/all>
<forceunauthorized/forceauthorized/auto>
Page view 229
1 2 ... 225 226 227 228 229 230 231 232 233 234 235 ... 302 303

Comments to this Manuals

No comments