Intel BLADE SERVER IXM5414E User Manual Page 213

  • Download
  • Add to my manuals
  • Print
  • Page
    / 303
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 212
190 Intel® Blade Server Ethernet Switch Module IXM5414E: Installation and User’s Guide:A Guide for Technically
LAG Name The name of this LAG.
Link State Indicates whether the link is up or down.
Admin Mode
The administrative mode. The factory default is enabled.
Link Trap Mode
Indicates whether or not a trap will be sent when link status changes. The factory
default is enabled.
STP Mode The Spanning Tree Protocol Administrative Mode associated with the LAG. The
possible values are:
Disable -
Spanning tree is disabled for this LAG.
Enable -
Spanning tree is enabled for this LAG.
Mbr Ports A listing of the ports that are members of this LAG, in port notation. There can be a
maximum of 8 ports assigned to a given LAG.
Port Speed The speed of the LAG. A LAG is always full-duplex.
MAC filter commands
config macfilter adddest
Use this command to add the <port> to the destination filter set for the MAC filter with the MAC
address of <macaddr> and VLAN of <vlan>. The <macaddr> parameter must be specified as a 6-
byte hexadecimal number in the format of 00-12-34-56-78-90. The <vlan> parameter must identify
a valid VLAN.
The <port> parameter identifies the destination port(s) to be added to the destination port filter set
for the MAC filter. If <all> is selected, all ports will be added to the destination port filter set.
Packets for the specified MAC address and VLAN ID will only be transmitted out of ports that are in
the filter set.
Format config macfilter adddest <macaddr> <vlan> <port/listofports/all>
config macfilter create
Use this command to add a static MAC filter entry for a MAC address and VLAN pair. The
<macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of 00-12-34-
56-78-90.
Filters may not be defined for MAC addresses:
00-00-00-00-00-00
01-80-C2-00-00-00 to 01-80-C2-00-00-0F
01-80-C2-00-00-20 to 01-80-C2-00-00-21
FF-FF-FF-FF-FF-FF
The <vlan> parameter must identify a valid VLAN.
Up to 100 static MAC filters may be created.
Format config macfilter create <macaddr> <vlan>
Page view 212
1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 302 303

Comments to this Manuals

No comments