Intel Core 2 Duo User Manual download pdf (Page 31)

Intel

Core

2 Duo Processor and Intel

Q35 Express Chipset Development Kit

October 2007 User’s Manual

Order Number: 318476001US 31

Setting Up and Configuring the Development Kit—Intel Core 2 Duo Processor and Intel Q35

Express Chipset

2. Set jumpers to default positions. Refer to Section 2.8.1 for default positions.

3. Install the processor and ensure the 4-pin CPU fan power connector is installed on

header shown in Figure 23.

4. Install the DDR2 DIMM in the Channel A Slot 0 connector. DIMMs should never be

inserted or removed unless the power supply is disconnected from the AC power

source. Refer to Section 2.5 for system memory configuration.

5. Connect a SATA hard drive, USB keyboard, USB mouse, and VGA monitor (video

card is optional).

6. Connect a 2x12 standard power supply and 2x2 standard power supply as well.

Refer to Figure 24 for the location.

7. Plug the power cable into the back of the power supply, leaving the switch in the

OFF position.

8. Once the board is set up, plug the cord into the power source. Switch on the power

supply.

9. Press the power button. Refer to Figure 24 or Figure 1 for power-on button

location.

Figure 23. CPU Fan location

4-pin CPU Fan Power

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

No comments

Intel Core 2 Duo User Manual Page 31