Intel 8mb User Manual download pdf (Page 14)

Figure 5. Package Installation / Removal Features

Socket Standoffs and Package Seating Plane

Standoffs on the bottom of the socket base establish the minimum socket height after

solder reflow and are specified in Socket Mechanical Drawings.

Similarly, a seating plane on the topside of the socket establishes the minimum

package height. See Package / Socket Stackup Height on page 24 for the calculated

IHS height above the motherboard.

Durability

The socket must withstand 20 cycles of processor insertion and removal. The

maximum chain contact resistance from Table 6 on page 26 must be met when

mated in the 1st and 20th cycles.

The socket Pick and Place cover must withstand 15 cycles of insertion and removal.

Markings

There are three markings on the socket:

• LGA1150: Font type is Helvetica Bold - minimum 6 point (2.125 mm). This mark

will also appear on the pick and place cap.

• Manufacturer's insignia (font size at supplier discretion).

• Lot identification code (allows traceability of manufacturing date and location).

All markings must withstand 260 °C for 40 seconds (typical reflow/rework profile)

without degrading, and must be visible after the socket is mounted on the

motherboard.

LGA1150 and the manufacturer's insignia are molded or laser marked on the side wall.

2.5

2.6

LGA1150 Socket—LGA1150 Socket

LGA1150 Socket

Application Guide September 2013

14 Order No.: 328999-002

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

No comments

Intel 8mb User Manual Page 14