Intel 8mb User Manual download pdf (Page 12)

• Lead free SAC (SnAgCu) 305 solder alloy with a silver (Ag) content between 3%

and 4% and a melting temperature of approximately 217 °C. The alloy is

compatible with immersion silver (ImAg) and Organic Solderability Protectant

(OSP) motherboard surface finishes and a SAC alloy solder paste.

• Solder ball diameter 0.6 mm ± 0.02 mm, before attaching to the socket lead.

The co-planarity (profile) and true position requirements are defined in Socket

Mechanical Drawings.

Contacts

Base material for the contacts is high strength copper alloy.

For the area on socket contacts where processor lands will mate, there is a 0.381 µm

[15 µinches] minimum gold plating over 1.27 µm [50 minches] minimum nickel

underplate.

No contamination by solder in the contact area is allowed during solder reflow.

Pick and Place Cover

The cover provides a planar surface for vacuum pick up used to place components in

the Surface Mount Technology (SMT) manufacturing line. The cover remains on the

socket during reflow to help prevent contamination during reflow. The cover can

withstand 260 °C for 40 seconds (typical reflow/rework profile) and the conditions

listed in LGA1150 Socket and ILM Specifications on page 24 without degrading.

As indicated in Figure 4 on page 13, the cover remains on the socket during ILM

installation, and should remain on whenever possible to help prevent damage to the

socket contacts.

Cover retention must be sufficient to support the socket weight during lifting,

translation, and placement (board manufacturing), and during board and system

shipping and handling. PnP Cover should only be removed with tools, to prevent the

cover from falling into the contacts.

The socket vendors have a common interface on the socket body where the PnP cover

attaches to the socket body. This should allow the PnP covers to be compatible

between socket suppliers.

As indicated in Figure 4 on page 13, a Pin 1 indicator on the cover provides a visual

reference for proper orientation with the socket.

LGA1150 Socket—LGA1150 Socket

LGA1150 Socket

Application Guide September 2013

12 Order No.: 328999-002

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

No comments

Intel 8mb User Manual Page 12