Intel I815E User Manual download pdf (Page 41)

BIOS SETUP

I815E User’s Manual 37

IDE Primary/Secondary Master/Slave UDMA

These fields allow your system to improve disk I/O throughput to

33Mb/sec with the Ultra DMA/33 feature. The options are Auto and

Disabled.

USB Controller

The options for this field are Enabled and Disabled. By default, this field

is set to Enabled.

USB Keyboard Support

The options for this field are Enabled and Disabled. By default, this field

is set to Disabled.

Init Display First

This field allows the system to initialize first the VGA card on chip or the

display on the PCI Slot. By default, the PCI Slot VGA is initialized first.

AC97 Audio

The default setting of the AC97 Audio is Auto.

IDE HDD Block Mode

This field allows your hard disk controller to use the fast block mode to

transfer data to and from your hard disk drive.

POWER ON Function

This field allows powering on by the following methods:

Password Hot KEY Mouse Left Mouse Right

Any KEY BUTTON ONLY Keyboard 98

KB Power ON Password

This field allows you to set the power on function via the keyboard.

Hot Key Power ON

This field allows you to set the power on function via hot keys on the

keyboard including Ctrl-F1 to Ctrl-F12.

Onboard FDC Controller

Select Enabled if your system has a floppy disk controller (FDC)

installed on the board and you wish to use it. If you install an add-in FDC

or the system has no floppy drive, select Disabled in this field. This option

allows you to select the onboard FDD port.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 79 80

No comments

Intel I815E User Manual Page 41