Intel I815E User Manual download pdf (Page 44)

BIOS SETUP

40 I815E User’s Manual

Video Off Method

This field defines the Video Off features. There are three options.

V/H SYNC + Blank Default setting, blank the screen and turn off

vertical and horizontal scanning.

DPMS Allows the BIOS to control the video

display card if it supports the DPMS feature.

Blank Screen This option only writes blanks to the video

buffer.

Video Off In Suspend

When enabled, the video is off in suspend mode. The default setting is

Yes.

Suspend Type

The default setting for the Suspend Type field is Stop Grant.

Modem Use IRQ

This field sets the IRQ used by the Modem. By default, the setting is 3.

Suspend Mode

When enabled, and after the set time of system inactivity, all devices

except the CPU will be shut off.

HDD Power Down

When enabled, and after the set time of system inactivity, the hard disk

drive will be powered down while all other devices remain active.

Soft-Off by PWRBTN

This field defines the power-off mode when using an ATX power supply.

The Instant Off mode allows powering off immediately upon pressing the

power button. In the Delay 4 Sec mode, the system powers off when the

power button is pressed for more than four seconds or enters the suspend

mode when pressed for less than 4 seconds. The default value is Instant

Off.

Wake-up by PCI Card

This field enables or disables the wake up function through a PCI card.

Power On by Ring

This field enables or disables the power on of the system through the

modem connected to the serial port or LAN.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 79 80

No comments

Intel I815E User Manual Page 44