Intel DG41MJ User Manual download pdf (Page 31)

Installing and Replacing Desktop Board Components

Installing the Processor Fan Heat Sink

Intel Desktop Board DG41MJ has mounting holes for a processor fan heat sink. For

instructions on how to attach the processor fan heat sink to the Desktop Board, refer

to the boxed processor manual.

Connecting the Processor Fan Heat Sink Cable

Connect the processor fan heat sink cable to the 4-pin processor fan header (see

Figure 12). A fan with a 4-pi

n connector as shown in Figure 12, A is recommended;

however, a fan with a 3-pin connector (Figure 12, B) can be used. However, since the

fan

with a 3-pin connector cannot use the onboard fan control, the fan will always

operate at full speed.

Figure 12. Connecting the Processor Fan Heat Sink Cable to the

Processor Fan Header

Removing the Processor

For instructions on how to remove the processor fan heat sink and processor, refer to

the processor installation manual.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 67 68

No comments

Intel DG41MJ User Manual Page 31