Intel DG41MJ User Manual download pdf (Page 35)

Installing and Replacing Desktop Board Components

Removing DIMMs

To remove a DIMM, follow these steps:

1. Observe the precautions in "Before You Begin" on page 23.

2. Turn off all peripheral devices connected to the

computer. Turn off the computer.

3. Remove the AC power cord from the computer.

4. Remove the computer’s cover.

5. Gently spread the retaining clips at each end of the DIMM socket. The DIMM pops

out of the socket.

6. Hold the DIMM by the edges, lift it away from the socket, and store it in an

anti-static package.

7. Reinstall and reconnect any parts you removed or disconnected to reach the DIMM

sockets.

8. Replace the computer’s cover and reconnect the AC power cord.

Using the Serial ATA (SATA) Cables

Two SATA cables are provided with the Desktop Board:

• a standard SATA data cable

• a SATA-to-Slimline SATA adapter cable (with power) that allows you to connect a

Slimline SATA drive to the board

Each cable can be used to connect a single internal SATA drive to the Desktop Board.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 67 68

No comments

Intel DG41MJ User Manual Page 35