Intel Integrated Touchscreen Computer J2 650 User Manual

J2 650 Integrated Touchscreen Computer System Manual August 2008

650 System Manual (Draft) Version 0.4 August 20, 2008 10 Automatic LCD Brightness Control Another innovative feature of the 650 is its use of a light

650 System Manual (Draft) Version 0.4 August 20, 2008 11System Configurations The 650 can be ordered or upgraded to many possible configurations. Se

650 System Manual (Draft) Version 0.4 August 20, 2008 12 Processors currently supported on the 650 CPU#Description(allaredesktopprocessors)C

650 System Manual (Draft) Version 0.4 August 20, 2008 13I/O Ports The 650 is an integrated design with all the electronics in the head. Most I/O port

650 System Manual (Draft) Version 0.4 August 20, 2008 14Hard Disks Two 2.5 inch SATA hard drives (HDD) are supported. These drives can be configured

650 System Manual (Draft) Version 0.4 August 20, 2008 15Compact Flash The 650 has one Type I/II Compact Flash (CF) memory slot. This slot is only for

650 System Manual (Draft) Version 0.4 August 20, 2008 16 System Board POS computers typically have a desired lifespan of 10 years or longer, therefor

650 System Manual (Draft) Version 0.4 August 20, 2008 17Secondary Display Port A secondary video display is supported on the 650 and can be set as th

650 System Manual (Draft) Version 0.4 August 20, 2008 18Serial ports The 650 has three external RS232 serial ports, two of which can be powered COM2

650 System Manual (Draft) Version 0.4 August 20, 2008 19Parallel Port The 650 has one Parallel Printer Port located in the connector well (shown bel

650 System Manual (Draft) Version 0.4 August 20, 2008 2ContentsOverview ...

650 System Manual (Draft) Version 0.4 August 20, 2008 20Ethernet Connection The 650 uses the Realtek 8111C Gigabit Ethernet controller. The Ethernet

650 System Manual (Draft) Version 0.4 August 20, 2008 21Audio The 650 uses the VIA1708B HD audio controller. There is one internal speaker. Both a m

650 System Manual (Draft) Version 0.4 August 20, 2008 22Cash Drawer Ports The 650 is equipped standard with two Cash Drawer ports. These ports are l

650 System Manual (Draft) Version 0.4 August 20, 2008 23bits of COM5, and the drawer open/close status will be reflected on the CTS and RI bits, eith

650 System Manual (Draft) Version 0.4 August 20, 2008 24Service Removing the Head from the Base A countertop base is supplied standard with the unit.

650 System Manual (Draft) Version 0.4 August 20, 2008 25Removing the Power Supply The power supply is normally located in the counter top base. When

650 System Manual (Draft) Version 0.4 August 20, 2008 26 Wall Mounting Bracket A wall mount/VESA adapter bracket is supplied standard with the 650

650 System Manual (Draft) Version 0.4 August 20, 2008 27VESA Mounting The 650 unit also supports the industry standard 75mm VESA mounting. J2 offers

650 System Manual (Draft) Version 0.4 August 20, 2008 28 Removing the Back Cover The following steps show how to disassemble the 650 for servicing:

650 System Manual (Draft) Version 0.4 August 20, 2008 29Changing the System Board *Special Note: An anti-static workplace with proper grounding is

650 System Manual (Draft) Version 0.4 August 20, 2008 3Removing the Back Cover ...

650 System Manual (Draft) Version 0.4 August 20, 2008 30After the screws are removed the system board can be unplugged from its connector. While usin

650 System Manual (Draft) Version 0.4 August 20, 2008 31Adding Memory Note: An anti static workplace with proper grounding is required when adding me

650 System Manual (Draft) Version 0.4 August 20, 2008 32Accessing the CF Card Remove screw as shown Lift cover out of the way Insert the Compact

650 System Manual (Draft) Version 0.4 August 20, 2008 33 Accessing the Hard Drives Remove cover screw as shown Remove cover Remove or insert dri

650 System Manual (Draft) Version 0.4 August 20, 2008 34BIOS Setup Entering the BIOS Setup To enter the BIOS Setup, turn on or reboot the 650. Press

650 System Manual (Draft) Version 0.4 August 20, 2008 35Advanced Settings This menu contains settings to control a number of system functions. The Ha

650 System Manual (Draft) Version 0.4 August 20, 2008 36SATA Configuration Screen When in SATA mode, hard drive type and size information and addit

650 System Manual (Draft) Version 0.4 August 20, 2008 37Super I/O Configuration This submenu allows for the setting of the serial ports I/O address

650 System Manual (Draft) Version 0.4 August 20, 2008 38USB Configuration Here the function of the USB ports can be change or disabled. This is to su

650 System Manual (Draft) Version 0.4 August 20, 2008 39Green Mode This feature is unique to the 650 system. This feature can be enabled or disabled

650 System Manual (Draft) Version 0.4 August 20, 2008 4Applications ...

650 System Manual (Draft) Version 0.4 August 20, 2008 40LCD Brightness Control Mode / Auto Mode Another unique feature of the 650 is the LCD Brightne

650 System Manual (Draft) Version 0.4 August 20, 2008 41There are five settings that control the auto brightness function; however the default settin

650 System Manual (Draft) Version 0.4 August 20, 2008 42 Both Norton Ghost and Acronis disk image software can use the PXE boot ROM to download softw

650 System Manual (Draft) Version 0.4 August 20, 2008 43RTC Configuration Screen Wake On LAN Wake On LAN has no BIOS setting and is always enabled.

650 System Manual (Draft) Version 0.4 August 20, 2008 44There is a utility written by HP which can format almost any USB memory device to be bootable

650 System Manual (Draft) Version 0.4 August 20, 2008 45Exit Options After making any changes to the BIOS settings, the changes can be saved from thi

650 System Manual (Draft) Version 0.4 August 20, 2008 46Driver Installation / Vista, XP Chipset Driver Installation The chipset driver is needed to

650 System Manual (Draft) Version 0.4 August 20, 2008 47 Audio Driver Installation The Audio Drivers can be downloaded from the J2 web site at: http

650 System Manual (Draft) Version 0.4 August 20, 2008 48Second Audio setup screen Check the Codec Driver box, and then click Next. Answer Next to a

650 System Manual (Draft) Version 0.4 August 20, 2008 49Touch Screen Driver Installation The Touch Drivers can be downloaded from the J2 web site at

650 System Manual (Draft) Version 0.4 August 20, 2008 5Overview The 650 from J2 is the most high performance integrated Point of Sale computer avail

650 System Manual (Draft) Version 0.4 August 20, 2008 50 Click the box “OK” to the PS/2 Warning message, then Next. Check the “None” selection, th

650 System Manual (Draft) Version 0.4 August 20, 2008 51 Click the box “OK” to the USB message. UN-Check the box ”Support Multi-Monitor system” un

650 System Manual (Draft) Version 0.4 August 20, 2008 52After the system has rebooted touch should be working but will need to be calibrated. Click S

650 System Manual (Draft) Version 0.4 August 20, 2008 53OPOS drivers The OPOS driver for the 650 supports the Cash Drawer ports, the optional MSR, t

650 System Manual (Draft) Version 0.4 August 20, 2008 54J2 Health Monitor Overview The J2 Health Monitoring software provides a common method for a

650 System Manual (Draft) Version 0.4 August 20, 2008 55A copy will also be loaded in the Startup folder so the program loads on boot up. The progra

650 System Manual (Draft) Version 0.4 August 20, 2008 56 Theory of Operation The J2 Health Monitor software is an application program that loads on

650 System Manual (Draft) Version 0.4 August 20, 2008 57 Registry Keys The registry key values are stored under HKEY_LOCAL_MACHINE\HARDWARE\DESCRIPT

650 System Manual (Draft) Version 0.4 August 20, 2008 58 Refresh Interval The refresh interval controls how often the hardware monitor values are up

650 System Manual (Draft) Version 0.4 August 20, 2008 59RAID RAID Overview The 650 is unique in that it is the only integrated POS computer to curren

650 System Manual (Draft) Version 0.4 August 20, 2008 6

650 System Manual (Draft) Version 0.4 August 20, 2008 60Enabling RAID in the BIOS The Intel manual for the Intel Matrix Storage Manager covers this

650 System Manual (Draft) Version 0.4 August 20, 2008 61Perform the following steps to install the Intel Matrix Storage Manager driver during operati

650 System Manual (Draft) Version 0.4 August 20, 2008 62 If a hot spare is available, all that needs to be done is to swap the bad drive with the hot

650 System Manual (Draft) Version 0.4 August 20, 2008 63 The RAID will now rebuild an image of the good drive to the hot spare. Rebuilding Rebu

650 System Manual (Draft) Version 0.4 August 20, 2008 64Packing List In addition to the foam packing inserts, the following contents should be found

650 System Manual (Draft) Version 0.4 August 20, 2008 65650 Optional Peripherals MSR Overview The 650 can be ordered with a 3 track MSR. The MSR mou

650 System Manual (Draft) Version 0.4 August 20, 2008 66Installing the 650 MSR The 650 MSR is installed by first removing the MSR cover plate on the

650 System Manual (Draft) Version 0.4 August 20, 2008 67 Slide the MSR in to its mounting groove being sure not to pinch the cable. Attach the MSR u

650 System Manual (Draft) Version 0.4 August 20, 2008 68You may now power up the 650 and the MSR should be working. For a quick test you can open Not

650 System Manual (Draft) Version 0.4 August 20, 2008 69 Beep on Error: This setting will disable or enable the MSR double beep tone on a bad read. N

650 System Manual (Draft) Version 0.4 August 20, 2008 7Specification Main board CPU Support Intel Desktop Processors LGA775, 1066 MHz FSB, 65

650 System Manual (Draft) Version 0.4 August 20, 2008 70Data may be entered using the touch screen keypad or keyboard. Valid characters are any print

650 System Manual (Draft) Version 0.4 August 20, 2008 71MSR Firmware Update The MSR firmware can be updated in-circuit using this utility. This is t

650 System Manual (Draft) Version 0.4 August 20, 2008 72650 UPS Specifications Hardware To install and use the J2 UPS module: 1: Remove the power

650 System Manual (Draft) Version 0.4 August 20, 2008 73Software Setup in XP 1: From the START button run CONTROL PANEL. 2: Double click POWER OPT

650 System Manual (Draft) Version 0.4 August 20, 2008 745: The default values for the Interface Configuration are what the J2 UPS uses so just click

650 System Manual (Draft) Version 0.4 August 20, 2008 75STATUS LED There is one green status LED on the UPS. This can be viewed when by looking into

650 System Manual (Draft) Version 0.4 August 20, 2008 76Customer Display To be added Secondary Video Display To be added Fingerprint Reader / MSR T

650 System Manual (Draft) Version 0.4 August 20, 2008 77iButton / MSR To be added RFID / MSR To be added Laser Scanner To be added

650 System Manual (Draft) Version 0.4 August 20, 2008 78Contact Information Worldwide Headquarters: J2 Retail Systems Ltd. J2 House Clayton Road, Bi

650 System Manual (Draft) Version 0.4 August 20, 2008 8 Power Power Adapter 19VDC, 135W, 100-240 VAC,50~60Hz, 2.2A Optional Peripheral MSR 3 Trac

650 System Manual (Draft) Version 0.4 August 20, 2008 9Unique Features The 650 truly has some unique features not hitherto seen on an integrated tou