Intel SC5250-E Datasheet download pdf (Page 11)

Intel® Entry Server Chassis SC5250-E Introduction

Revision 1.02

Intel order number C32881-001

1. Introduction

This specification details the feature set of the Intel

Server Chassis SC5250-E, an entry-level

server chassis designed for Intel

server board products. The server chassis SC5250-E is low

cost and allows utilization of multiple platforms and configurations.

The server chassis SC5250-E (KPTBASE450) is designed to address the value server market.

It includes a single 450W power factor correction (PFC) power supply, and supports four non

hot-swap hard drives. One tachometer fan that is mounted in front of the fixed drive cage, and

one that is mounted at the rear of the chassis provide Main chassis cooling. This chassis is

currently compatible with: Intel® Server Board SE7501BR2, Intel® Server Board SE7500CW2,

Intel® Server Board SE7501CW2, Intel® Server Boards SE7505VB2, Intel® Server Board

S845WD1-E, Intel® Server Board S875WP1-E and Intel® Server Board SE7210TP1-E.

Two 5.25-inch, half-height drive bays are available for peripherals, such as CD-ROM and tape

drives, and a removable access cover provides entry to the interior of the chassis. The rear I/O

panel conforms to Advanced Technology Extended (ATX) Specification, Revision 2.03. The

chassis supports seven full-length expansion cards. The chassis is provided with a front panel

board designed for Server Standards Infrastructure (SSI) Entry E-Bay (EEB) 3.0-compliant

server boards.

An optional hot-swap drive bay kit, product code AXX2HSDRVUG, provides an upgrade path to

allow the server chassis SC5250-E to support five hot-swap drives. This optional hot-swap SCSI

hard disk drive bay supports up to five 1-inch single connector attachment (SCA) low-voltage

differential SCSI (LVD) hard drives to enhance serviceability, availability, and upgradeability of

the system. When the hot-swap drive bay is installed, it replaces the fixed hard drive bay.

An optional hot-swap upgrade drive bay assembly (ASATAHSDB) is available for the Server

Chassis SC5200 and Server Chassis SC5250-E. It should be mounted in place of the middle

three 5.25-inch drive trays of the base, non-redundant chassis models. For the redundant

power models, the upgrade accessory should be installed in the lower three 5.25-inch drive

trays to bring the total number of available hot-swap SATA drives to eight. Refer to the Intel

Server Chassis SC5200/SC5250-E Hot-swap Bay Upgrade Kit for complete installation

instructions. Note: Part of the replacement process requires removing the fan from the fixed

hard drive bay attaching it to the rear of the hot-swap drive bay.

An optional passive processor cool kit (APTWKTCOOLKIT) is available for the Intel Server

Chassis SC5250-E and SE7505VB2 only. It should be mounted in place of the boxed board

processor active heatsinks and fan solutions. The APTWKTCOOLKIT requires BIOS 1.08 or

newer releases for SE7505VB2. Refer to the Intel

Server Chassis SC5200/SC5250-E Hot-

swap SCSI Bay Upgrade Kit for complete installation instructions.

This specification details the key features of the product. Reference documents listed at the

back of this document provide additional product specification details for the server boards,

backplanes, and power supplies validated for use with this chassis. Check the compatibility

section on the support website for more details:

http://support.intel.com/support/motherboards/server/chassis/SC5250-E/

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 72 73

Comments to this Manuals

No comments

Intel SC5250-E Datasheet Page 11

Comments to this Manuals

Related products and manuals for Computer cases Intel SC5250-E