Intel SR1500AL User Manual download pdf (Page 48)

26 Intel

Server System SR1500AL User’s Guide

Installing the Front Bezel

Use the steps below if your system includes either the standard front bezel or the front

bezel for the Intel

Local Control Panel. The front bezel is optional.

1. At each end of the bezel, line up the center notch on the bezel with the center guide

on the rack handles.

2. Push the bezel onto the front of the server system until it clicks into place.

3. Connect any necessary cables to the front control panel area at the right side of the

server system.

Figure 17. Installing the Front Bezel

Removing and Installing the System Cover

Removing the System Cover

The server system must be operated with the system cover in place to ensure proper

cooling. You will need to remove the top cover to add or replace components inside of the

server. Before removing the chassis cover, power down the server and unplug all

peripheral devices and the AC power cable(s).

Note: A nonskid surface or a stop behind the server system may be needed to prevent the server

system from sliding on your work surface.

1. Observe the safety and ESD precautions at the beginning of this book. See “Safety

Information”.

TP02200

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 179 180

No comments

Intel SR1500AL User Manual Page 48