Intel SR1500AL User Manual download pdf (Page 46)

24 Intel

Server System SR1500AL User’s Guide

11. Slide the server chassis all the way into the rack.

12. Use the rack screws (#10-32 x 3/4) to secure the chassis and rack handles into the

rack.

Tool-less Rail Rack Mount Servicing

1. To service the system, pull the system out from the rack.

2. Disconnect the power cable(s) and proceed with servicing the system.

3. When the servicing is completed, re-connect the power cable(s).

4. Pull up on the green tabs on each rail and slide the system back into the rack.

Note: Beware of cables when re-installing the system into the rack so that the cables do not get

pulled or interfered with.

Removing and Installing the Front Bezel

The front bezels are available as optional accessories for the Intel

Server System

SR1500AL. Two front bezel options are available. One is used for the standard control

panel and the other is used with the Intel

Local Control Panel. See the diagrams below to

identify your front bezel. Note the orientation in the figures below - the control panel is at

the right. If you are installing a bezel on your server system, make sure you position it as

shown.

Figure 14. Front View with Bezel supporting the Standard Control Panel

Figure 15. Front View with Bezel supporting the Intel

Local Control Panel

TP02197

TP02198

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 179 180

No comments

Intel SR1500AL User Manual Page 46