STL2 Server BoardTechnical Product SpecificationRevision 1.0September 22, 2000Enterprise Platforms Group
Introduction STL2 Server Board TPS1-2• 32-bit, 33 MHz, 5V keyed PCI segment with four expansion connectors and threeembedded devices.- Four 32-bit, 33
Reference Documents STL2 Server Board TPSIIReference Documents• ServerWorks ServerSet* III LE North Bridge Specification.• ServerWorks ServerSet* III
STL2 Server Board EPS IndexRevision 1.0 IIIIndexAACPI, 2-7, 3-23, 3-25, 3-26, 4-49, 5-73Adaptec* AIC7899, 1-1, 2-8Address, 2-9, 2-13, 2-17, 3-25, 4-39
Index STL2 Server Board TPSIVISA, 2-14, 2-15, 2-16, 2-17, 3-21, 3-24, 4-48JJEDEC, 1-1, 2-7LLED, 5-73Legacy, 2-15, 4-40Logo, 4-41LUN, 4-55MMagic Packet
STL2 Server Board EPS IndexRevision 1.0 VSuper I/O Controller, 1-2System Event Log, See SELSystem Management Software, 3-21System Setup Utility, See S
STL2 Server Board TPS IntroductionRevision 1.0 1-3NB6635 North Bridge 3.0 LEIB6566 SouthBridge2 USBIDESTL2 Server Board Block DiagramSTL2 Server Board
Introduction STL2 Server Board TPS1-4< This page intentionally left blank >
STL2 Server Board TPS STL2 Server Board Architecture OverviewRevision 1.0 2-52. STL2 Server Board Architecture OverviewThe architecture of the STL2 se
STL2 Server Board Architecture Overview STL2 Server Board TPS2-62.1.2 Dual Processor OperationThe Pentium III processor interface is designed to be MP
STL2 Server Board TPS STL2 Server Board Architecture OverviewRevision 1.0 2-7The boxed processor fan heatsink will keep the processor core at the reco
STL2 Server Board Architecture Overview STL2 Server Board TPS2-8System memory begins at address 0 and is continuous (flat addressing) up to the maximu
STL2 Server Board TPS STL2 Server Board Architecture OverviewRevision 1.0 2-9Table 2-2. SCSI Transfer SpeedsSCSI Port Asynchronous Fast-5 Fast-10 Fast
STL2 Server Board Architecture Overview STL2 Server Board TPS2-107. Defaults to Memory Write.The extensions to memory commands (memory read multiple,
STL2 Server Board TPS STL2 Server Board Architecture OverviewRevision 1.0 2-11The 82559 is a highly integrated PCI LAN controller for 10 or 100 Mbps F
Revision History STL2 Server Board TPSiiRevision HistoryDate RevisionNumberModifications6/15/00 0.5 Initial release.6/20/00 0.6 Updated connector refe
STL2 Server Board Architecture Overview STL2 Server Board TPS2-12• Integrated physical interface to TX magnetics.• The magnetics component terminates
STL2 Server Board TPS STL2 Server Board Architecture OverviewRevision 1.0 2-132.4.2.2.2 Video Controller PCI CommandsThe Rage IIC supports the followi
STL2 Server Board Architecture Overview STL2 Server Board TPS2-142.4.2.3 IB6566 South BridgeThe IB6566 South Bridge is a PCI device that provides mult
STL2 Server Board TPS STL2 Server Board Architecture OverviewRevision 1.0 2-152.4.2.3.3 USB InterfaceThe IB6566 South Bridge contains a USB controller
STL2 Server Board Architecture Overview STL2 Server Board TPS2-162.5.1.1 Serial PortsTwo 9-pin connectors in D-Sub housing are provided for serial por
STL2 Server Board TPS STL2 Server Board Architecture OverviewRevision 1.0 2-172.5.2 BIOS FlashThe STL2 baseboard incorporates an Intel® 5V FlashFile™
STL2 Server Board Architecture Overview STL2 Server Board TPS2-18IRQ0/INTRIRQ1IRQ2IRQ3IRQ4IRQ5IRQ6IRQ7IRQ8IRQ9/SCIIRQ10IRQ11IRQ12IRQ13IRQ14IRQ15PCIIRQ
STL2 Server Board TPS STL2 Server Board Architecture OverviewRevision 1.0 2-19IRQ0IRQ1IRQ2IRQ3IRQ4IRQ5IRQ6IRQ7IRQ8IRQ9IRQ10IRQ11IRQ12IRQ13IRQ14IRQ15PI
STL2 Server Board Architecture Overview STL2 Server Board TPS2-202.6.3 PCI IdsThe STL2 server board PCI Ids are defined as follows:Table 2-6. STL2 PCI
STL2 Server Board TPS STL2 Server Board Architecture OverviewRevision 1.0 2-21
STL2 Server Board TPS Table of ContentsRevision 1.0 iiiTable of Contents1. Introduction ...
STL2 Server Board TPS Server ManagementRevision 1.0 3-233. Server ManagementThis section describes the features of the server management subsystem for
Server Management STL2 Server Board TPS3-24• Monitors the event receiver• Controls secure mode, inlucluding video blanding, diskett write-protect moni
STL2 Server Board TPS Server ManagementRevision 1.0 3-25Sensor Number Sensor Type Monitoring Device94h BIOS POST (Error) Code95h Log Disable Log Area
Server Management STL2 Server Board TPS3-26Sensor Type Sensor TypeCodeSensor-SpecificOffsetEvent RemarksPlatform SecurityViolation Attempt06h 00h Secu
STL2 Server Board TPS Server ManagementRevision 1.0 3-27Sensor Type Sensor TypeCodeSensor-SpecificOffsetEvent Remarks04h CD-ROM boot completed The ser
Server Management STL2 Server Board TPS3-28• s4: Hibernate or Save to Disk. The memory and machine state are saved to disk.Pressing the power button o
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-294. Basic Input Output System (BIOS)This section describes BIOS embedded softwar
Basic Input Output System (BIOS) STL2 Server Board TPS4-304.1.1 System BIOSThe system BIOS is the core of the flash ROM-resident portion of the BIOS.
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-31Application software must use standard advanced programmable interrupts (APIs)
Table of Contents STL2 Server Board TPSiv3.5 Wake On LAN Function...
Basic Input Output System (BIOS) STL2 Server Board TPS4-324.2.2.1 Entering Setup UtilityDuring POST operation, the user is prompted to enter Setup usi
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-33←← →→Select MenuThe left and right arrow keys are used to move between the majo
Basic Input Output System (BIOS) STL2 Server Board TPS4-34• System Menu• Boot Menu• Exit MenuThese and associated submenus are described below.4.2.2.4
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-35Table 4-3. Primary Master and Slave Adapters Submenu SelectionsFeatureChoices o
Basic Input Output System (BIOS) STL2 Server Board TPS4-364.2.2.5 Advanced Menu SelectionsThe following tables describe the menu options and associate
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-37Table 4-7. Peripheral Configuration Submenu SelectionsFeature Choices or Displa
Basic Input Output System (BIOS) STL2 Server Board TPS4-38Table 4-8. PCI Device Submenu SelectionsFeature Choices or Display Only Description User Set
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-39Feature Choices orDisplay OnlyDescription UserSettingKeyboard Auto-repeat Rate
Basic Input Output System (BIOS) STL2 Server Board TPS4-40Table 4-12. Secure Mode Submenu SelectionsFeature Choices orDisplay OnlyDescription User Set
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-41DisabledTable 4-15. Console Redirection Submenu SelectionsFeature Choices or Di
STL2 Server Board TPS Table of ContentsRevision 1.0 v5.2.6 Speaker Connector (P31)...
Basic Input Output System (BIOS) STL2 Server Board TPS4-423 Hard Drive Attempts to boot from a hard drive device.4 Intel UNDI, PXE-2.0 Attempts to boo
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-434.4 CMOS Default OverrideThe BIOS detects the state of the CMOS default switch.
Basic Input Output System (BIOS) STL2 Server Board TPS4-44To manually load a portion of the BIOS, the user must specify which data file(s) to load. Th
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-45• The system state must be preserved by the user binary (all registers, includi
Basic Input Output System (BIOS) STL2 Server Board TPS4-46The following code fragment shows the header and format for a user binary:db 55h, 0AAh, 20h
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-47scan.Table 4-22. Format of the User Binary Information StructureOffset Bit Defi
Basic Input Output System (BIOS) STL2 Server Board TPS4-48mode operation, PHLASH (in non-interactive mode only) automatically updates only the mainsys
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-49• The 8-bit test point is broken down to four 2-bit groups.• Each group is made
Basic Input Output System (BIOS) STL2 Server Board TPS4-50CP Beeps Reason3C Configure advanced chipset registers3D Load alternate registers with CMOS
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-51CP Beeps Reason8C Initialize floppy controller90 Initialize hard disk controlle
List of Figures STL2 Server Board TPSviList of FiguresFigure 1-1. STL2 Server Board Block Diagram ...
Basic Input Output System (BIOS) STL2 Server Board TPS4-52Table 4-25. Recovery BIOS Port-80 CodesCP Beeps ReasonE0 Initialize chip setE1 Initialize br
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-53Code Error Message Failure Description0230: System RAM Failed at offset System
Basic Input Output System (BIOS) STL2 Server Board TPS4-54Code Error Message Failure Description0B93: BMC SDR Repository empty. BMC device (chip) fail
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-553-3-1-4 Memory Not Detected — —1-2 Option ROM Initialization Error Failure to i
Basic Input Output System (BIOS) STL2 Server Board TPS4-564.8 Adaptec SCSI UtilityThe Adaptec SCSI Utility detects the SCSI host adapters on the serve
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-57Key ActionArrows Up and down arrows move from one parameter to another within a
Basic Input Output System (BIOS) STL2 Server Board TPS4-582. Do not remove media from a removable media drive if it is under BIOS control.4.8.3 Exitin
STL2 Server Board TPS Basic Input Output System (BIOS)Revision 1.0 4-59< This page intentionally left blank >
STL2 Server Board TPS Jumpers and ConnectorsRevision 1.0 5-615. Jumpers and ConnectorsSTL2 Server Board Jumper and Connector LocationsThe following fi
STL2 Server Board TPS List of TablesRevision 1.0 viiList of TablesTable 2-1. STL2 Server Board Supported Processors ...
Jumpers and Connectors STL2 Server Board TPS5-62L. System fan connector FAN3A (P29)M. BatteryN. System fan connector FAN2A (P27)O. Front panel connect
STL2 Server Board TPS Jumpers and ConnectorsRevision 1.0 5-63E. Parallel port connectorF. Keyboard connectorG. Mouse connectorH. Video connectorI. Net
Jumpers and Connectors STL2 Server Board TPS5-64Table 5-1. Jumper Block 1J15 SettingsJumper PinNumbersFunction Jumper Position What it does at system
STL2 Server Board TPS Jumpers and ConnectorsRevision 1.0 5-655. After POST completes, power down the system, unplug the power cable(s), and removethe
Jumpers and Connectors STL2 Server Board TPS5-66Table 5-2. Jumper Block 5E1 SettingsProcessor Frequency (MHz)Jumper Settings1-2 3-4 5-6 7-8667 Not Jum
STL2 Server Board TPS Jumpers and ConnectorsRevision 1.0 5-67Table 5-4. Jumper Block 1L4 SettingsJumper PinNumbersFunction Jumper Position Function1 –
Jumpers and Connectors STL2 Server Board TPS5-685.2.1 Main ATX Power Connector (P33)Table 5-6. Main ATX Power Connector PinoutPin Signal Wire color Pi
STL2 Server Board TPS Jumpers and ConnectorsRevision 1.0 5-695.2.4 System Fan Connectors (P29, P27, P11)• System Fan 1: P11• System Fan 2: P27• System
Jumpers and Connectors STL2 Server Board TPS5-705.2.8 Diskette Drive Connector (P20)1834117Figure 5-3. Diskette Drive Connector Pin DiagramTable 5-13.
STL2 Server Board TPS Jumpers and ConnectorsRevision 1.0 5-71Pin Signal Pin Signal4 NC 12 DDCDAT5 GND 13 HSYNC6 GND 14 VSYNC7 GND 15 DDCCLK8 GND5.2.10
List of Tables STL2 Server Board TPSviiiTable 4-26. POST Error Messages and Codes...
Jumpers and Connectors STL2 Server Board TPS5-72Pin Signal Description2 RXD Receive data3 TXD Transmit data4 DTR Data terminal ready5 GND Ground6 DSR
STL2 Server Board TPS Jumpers and ConnectorsRevision 1.0 5-735.2.15 Ultra SCSI Connector (P9)Table 5-20. Ultra SCSI Connector PinoutPin Signal Pin Sig
Jumpers and Connectors STL2 Server Board TPS5-74Pin Signal Pin Signal15 GND 49 GND16 DIFFSENSA 50 GND17 TRMPWRA 51 TRMPWRA18 TRMPWRA 52 TRMPWRA19 No C
STL2 Server Board TPS Jumpers and ConnectorsRevision 1.0 5-75Pin Signal Pin Signal5 DD4 25 DD116 DD3 26 DD127 DD2 27 DD138 DD1 28 DD149 DD0 29 DD1510
Jumpers and Connectors STL2 Server Board TPS5-76A21 +3.3 V B21 AD29 A52 CBE0_L B52 AD8A22 AD28 B22 GND A53 +3.3 V B53 AD7A23 AD26 B23 AD27 A54 AD6 B54
STL2 Server Board TPS Jumpers and ConnectorsRevision 1.0 5-77Pin Signal Pin Signal Pin Signal Pin SignalA27 +3.3 V B27 AD23 A74 AD54 B74 AD55A28 AD22
Jumpers and Connectors STL2 Server Board TPS5-7816 Reserved17 Reset Switch (GND)18 Reserved19 ACPI Sleep Switch (Low True)20 Chassis Intrusion21 ACPI
STL2 Server Board TPS Jumpers and ConnectorsRevision 1.0 5-79< This page intentionally left blank >
STL2 Server Board TPS Power ConsumptionRevision 1.0 6-816. Power Consumption6.1 Calculated Power ConsumptionThe following table shows the calculated p
STL2 Server Board TPS IntroductionRevision 1.0 1-11. Introduction1.1 PurposeThis document provides an architectural overview of the STL2 server board,
Power Consumption STL2 Server Board TPS6-82The total power calculation assumes a system configuration containing dual Pentium® III 1GHz processors wit
STL2 Server Board TPS Mechanical SpecificationsRevision 1.0 7-837. Mechanical SpecificationsThe diagram on the following page shows the mechanical spe
Mechanical Specifications STL2 Server Board TPS7-84< This page intentionally left blank >
STL2 Server Board TPS Regulatory and Integration InformationRevision 1.0 8-858. Regulatory and Integration Information8.1 Regulatory ComplianceThe STL
Regulatory and Integration Information STL2 Server Board TPS8-86• Intel’s UL File Number E139761 (Component side).• Battery “+” marking: located on th
STL2 Server Board TPS Regulatory and Integration InformationRevision 1.0 8-878.2.2.1 In EuropeThe CE marking signifies compliance with all relevant Eu
Regulatory and Integration Information STL2 Server Board TPS8-888.2.5 Use Only for Intended ApplicationsThis product was evaluated for use in ITE comp
STL2 Server Board TPS Regulatory and Integration InformationRevision 1.0 8-898.3.2 System Environmental TestingThe system environmental tests include
Regulatory and Integration Information STL2 Server Board TPS8-90< This page intentionally left blank >
STL2 Server Board TPS GlossaryRevision 1.0 IGlossaryTerm DefinitionASIC Application Specific Integrated CircuitASR Asynchronous ResetBMC Baseboard Man
Comments to this Manuals