Intel SROMBSASMR (AXXROMBSASMR) User Manual Page 19

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 18
Intel® Integrated RAID Module SROMBSASMR (AXXROMBSASMR) Technical Product Specification Hardware
2.5 Electrical Characteristics
All power is supplied to the Intel
®
Integrated RAID Module SROMBSASMR through the board-
to-board connector via PCI Express* 3.3 V rails.
The supply voltages are 3.3 V ± 9 percent from PCI edge connector only. The maximum power
for the +3.3 V rail is 18 W. The +12 V rail is not provided by the base card. The +3.3 V rail is
used by the 3.3 V logic circuitry and also used to generate the other required voltage rails of
+1.5 V and +1.8 V. The +3.3 V auxiliary voltage is used to generate the +12 V standby for the
Intel
®
RAID Smart Battery AXXRSBBU3.
The voltage level used in the charging circuitry for the battery pack on the optional Intel
®
RAID
Smart Battery AXXRSBBU3 is +12 V. During fast charging of the battery pack, expected power
consumption is 230 mA rise in +12V current.
2.6 Environmental Specifications
Table 5. Environmental Specifications
Specification Description
Operating temperature 5 degrees Celsius to 60 degrees Celsius. The maximum operating temperature
decreases to +45 degrees Celsius when the Intel
®
RAID Smart Battery AXXRSBBU3 is
installed.
Relative humidity range 20% to 80% non-condensing
Maximum dew point
temperature
32 degrees Celsius
Airflow 200 linear feet per minute (LFPM)
MTBF (electrical
components)
470,600 hours at 40 degrees Celsius
Table 6. Storage and Transit Specifications
Specification Description
Temperature range without battery -30 degrees Celsius to +80 degrees Celsius (dry bulb)
Temperature range with battery 5 degrees Celsius to 45 degrees Celsius (dry bulb)
Relative humidity range 5% to 90 % non-condensing
2.6.1.1 Safety Characteristics
The Intel
®
Integrated RAID Module SROMBSASMR meets or exceeds the requirements of UL
flammability rating 94 V0. Each bare board is also marked with the supplier name or trademark,
type, and UL flammability rating. For the boards installed in a PCI Express* bus slot, all voltages
are lower than the SELV 42.4 V limit.
Revision 1.2
Intel order number E59029-003
13
Page view 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Comments to this Manuals

No comments