Intel DCP3600 1.2TB Specifications Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 42
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
Intel
®
Solid-State Drive DC P3600 Series
Product Specification July 2014
24 330569-002US
5.3 Log Page Support
Intel
®
SSD DC P3600 Series supports the following mandatory log pages defined in
NVMe* 1.0 specification:
Error Information (Log Identifier 01h)
SMART/ Health Information (Log Identifier 02h)
Firmware Slot Information (Log Identifier 03h)
Note: See NVMe* 1.0 version of the specification for the log page content.
Additionally, P3600 Series will support the following vendor unique log pages:
Log Page Directory (Log Identifier C0h)
Temperature Statistics (Log Identifier C5h)
Vendor Unique SMART Log (Log Identifier CAh)
Drive Marketing Name Log (Log Identifier DDh)
5.4 SMART Attributes
Table 18 lists the SMART attributes supported by the P3600 Series in accordance with
NVMe* 1.0 specification.
Table 18: SMART Attributes (Log Identifier 02h)
Byte
# of
Bytes
Attribute
Description
0
1
Critical Warning: These bits if set, flag
various warning sources.
Bit 0: Available Spare is below Threshold
Bit 1: Temperature has exceeded Threshold
Bit 2: Reliability is degraded due to excessive
media or internal errors
Bit 3: Media is placed in Read- Only Mode
Bit 4: Volatile Memory Backup System has
failed (e.g., enhanced power loss capacitor test
failure)
Bits 5-7: Reserved
Any of the critical warning can be tied to
asynchronous event notification.
1
2
Temperature: Overall Device current
temperature in Kelvin.
For AIC, it reports the NAND
temperature, for 2.5-inch FF, it is the
case temperature.
3
1
Available Spare: Contains a normalized
percentage (0 to 100%) of the remaining
spare capacity available
Starts from 100 and decrements.
4
1
Available Spare Threshold
Threshold is set to 10%.
5
1
Percentage Used Estimate (Value allowed to
exceed 100%)
A value of 100 indicates that the
estimated endurance of the device has
been consumed, but may not indicate a
device failure. The value is allowed to
exceed 100. Percentages greater than
254 shall be represented as 255. This
value shall be updated once per power-
on hour (when the controller is not in a
sleep state).
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 41 42

Comments to this Manuals

No comments