Intel Server SSR212MC2 User Manual download pdf (Page 7)

StorView* Enclosure Management Software User Guide Introduction

Revision 1.1

1. Introduction

StorView* Enclosure Management Interface is an information and monitoring tool for the Intel®

Storage Server SSR212MC2 and SSR212MC2R.

StorView is also designed to work with supported hard disk enclosures (JBODs) directly

attached to an HBA that supports SES (SCSI Enclosure Services). It is a component within the

StorView Storage Management Software.

1.1 System Requirements

Supported Enclosures:

• Xyratex* RS-1603

• Xyratex RS-1220

Supported HBAs:

• See Intel Storage Server SSR212MC2 Tested Hardware and OS List (THOL)

Supported Operating Systems:

• See Intel Storage Server SSR212MC2 Tested Hardware and OS List (THOL)

Note: only 32 bit operating systems are supported by StorView* Enclosure Management Software

1.2 Startup Notes

Linux sg Driver

Use of the software on Linux requires the SCSI Generic (sg) driver to be loaded. If it does not

show up in the list generated by the

lsmod command, it can be inserted into the running kernel

by typing:

/sbin/modprobe sg.

To have the sg module loaded at boot time, add the following line to the

/etc/rc.local file:

/sbin/modprobe sg > /dev/null 2>&1

Internet Explorer Enhanced Security Configuration

Internet Explorer Enhanced Security Configuration must be disabled before using this

application. This can be done via the Windows Add/Remove Programs function.

Network Failover

If you are running the system with more than one network interface, failover will not occur if one

network port is disconnected/disabled. For failover to the other network interface you will need

to restart the StorView service.

1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

No comments

Intel Server SSR212MC2 User Manual Page 7