Intel SASMF8I User Manual download pdf (Page 11)

Intel® RAID Controller SASMF8I Hardware User’s Guide 1

1 Overview

This chapter provides a general overview of the Intel

RAID Controller SASMF8I. It

consists of the following sections:

• Summary of SAS RAID Controller Features

• Benefits of Serial-Attached SCSI (SAS)

The Intel

RAID Controller SASMF8I is a high-performance PCI Express* SAS RAID

controller. It provides reliability, high performance, and fault-tolerant disk subsystem

management. This is an ideal RAID solution for the internal storage needs of mid to low-

end servers and workstations for use by workgroups and departmental-sized organizations

or individuals. The Intel

RAID Controller SASMF8I offers a cost-effective way to

implement RAID in a server for internal storage.

The SAS controller allows you to use SATA II and SAS hard disk drives in the same

system, so you can take advantage of the benefits of each type of drive. The controller

supports up to eight devices including expander devices. See the ANSI SAS Standard

Specification, Version 1.0 for more information about the use of expanders.

As the second generation PCI Express* storage adapter, the Intel

RAID Controller

SASMF8I addresses the growing demand for increased data throughput and scalability

requirements across mid to low-end servers and workstations. Simplified cabling between

drives is an additional benefit.

Summary of SAS RAID Controller Features

Note: In this document, the term low-profile refers to the height, not the length, of a PCI add-in

card.

The Intel

RAID Controller SASMF8I is a low-profile SAS RAID adapter with:

• An LSI 1068E SAS (including SATA) controller.

• Eight independent internal ports provided via two SFF8087 connectors.

• Support for both enterprise-class SAS devices and enterprise-class SATA II drives.

• Support for up to 8 SAS or SATA II drives and 40 logical drives.

• PCI Express* connector that fits into a x4 PCI Express slot capable of 2.5 Gbps per

lane over PCI Express* x1, or x4.

• 3.0 Gbps point-to-point transfer rate.

• Both a standard and a low-profile bracket.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 26 27

No comments

Intel SASMF8I User Manual Page 11