Intel Computer Hardware 273561-003 User Manual download pdf (Page 14)

14 Hardware Installation and User’s Guide

Hardware Installation

Figure 2-1. IIR Controller Component Layout

2.2.2 Installing the IIR Controller

1. Power-off the computer system.

2. Disconnect power cord(s) and remove the system cover.

3. Install the IIR controller into an available RAIDIOS-enabled PCI slot. See Figure 2-2.

Note:

The computer system (with RAIDIOS-enabled PCI slot) illustrated in Figure 2-2 may

not be representative of your system. Consult your system docs for the exact location of

the RAIDIOS-enabled PCI slot.

4. Connect one end of the SCSI cable to the on-board SCSI connector. Connect the other

end of the SCSI cable to the SCSI drives or drive enclosure.

Note:

Ensure that the end of the SCSI bus is properly terminated. See Section 2.4 in this

guide for termination details.

5. Replace the system cover and reconnect power cord(s).

167mm (6.57 inches)

56mm (2.20 inches)

J1B1

Flash Memory

I/O Processor

DS2A1

SDRAM

64Bit PCI Interface

(Requires a RAIDIOS

enabled PCI slot)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 26 27

No comments

Intel Computer Hardware 273561-003 User Manual Page 14