1U Server Chassis SR1300 PCI Riser Cards
Revision 1.2
Intel order number A94544-004
49
9. PCI Riser Cards
The SR1300 1U server chassis supports the use of two single-slot PCI riser cards.
Each riser card is capable of supporting a 3.3 V, 64-bit add-in card. For the SCSI SKU, the
board supports 66 MHZ PCI in the low profile slot and up to 100MHZ PCI-X in the full height
slot. If the onboard 7899 SCSI device is disabled in BIOS setup, the low profile slot can support
100Mhz PCI-X. For the ATA SKU both low profile and full height slots support 100MHZ PCI-X.
Table 31. Max Conditions for PCI Riser Cards
Configuration
Bus B with Anvik
Dual NIC down and 1
Slot Riser
Bus C with AIC7899
SCSI down and 1 Slot
Riser
Bus C with AIC7902
SCSI down and 1 Slot
Riser
0 Adapter Cards installed
and on board device
enabled
PCI-X 64/100 PCI-X 64/66 PCI-X 64/100
1 Adapter Cards installed
and on board device
enabled
PCI-X 64/100 PCI-X 64/66 PCI-X 64/100
Figure 25. PCI Riser Card Diagram
Comments to this Manuals