Intel DZ68BC User Manual download pdf (Page 27)

Desktop Board Features

Wake from Consumer IR

Consumer IR device activity wakes the computer from an ACPI S3, S4, or S5 state.

Wake from Serial Port

Serial port activity wakes the computer from an ACPI S3, S4, or S5 state.

Onboard Power and Reset Buttons

The lighted Power button on the Desktop Board (Figure 5, A) can be used to turn the

computer on or off. This button duplicates the function of the front panel power

button. To turn off the computer using the onboard Power button, press it for three

seconds.

The Power button stays lit when there is standby power still present on the board.

This is the case even when the computer appears to be off. For example, when this

button is lit, standby power is still present at the memory module sockets and the PCI

bus connectors.

CAUTION

If the AC power has been switched off and the onboard power button is still lit,

disconnect the power cord before installing or removing any devices connected to the

board. Failure to do so could damage the board and any attached devices.

The lighted Reset button on the Desktop Board (Figure 5, B) can be used to reset the

board. T

his button duplicates the function of the front panel Reset button.

Figure 5. Onboard Power and Reset Buttons

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 87 88

No comments

Intel DZ68BC User Manual Page 27