Intel 460T User Manual download pdf (Page 90)

CHAPTER 5

Intel Express 460T Standalone Switch Users Guide

Configure VLAN Operation Mode

Description

Use this screen to activate or change the type of VLAN operating on the

switch. If there are no VLANs active on the switch, this is the first screen

displayed when you select Configure VLAN from the Main Menu. By

default, VLANs are not active on the 460T switch so they must be turned

on before you can start configuring them.

The 460T switch supports operation of only one type of VLAN at a time. It

supports multiple VLANs of the same type.

Select the type of VLAN: Press z to change the type of VLAN on

the switch. The 460T Switch supports three types of VLANs: port-based,

MAC-based, and IEEE 802.1Q (tag-based) VLANs.

APPLY: Activates the changes to the VLAN and reboots the switch. Note:

To change between VLAN types, the switch must be rebooted.

To change VLAN modes

1 On the Main Menu, select Configure VLAN.

2 On the Configure VLAN menu, select VLAN Operation Mode.

3 Press z to change the type of VLAN on the switch. Press e.

4 Select the APPLY button and press e. This reboots the switch and

changes the VLAN mode.

LOCATION

Main Menu

Configure VLAN

(if switch is in Default Mode)

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 149 150

No comments

Intel 460T User Manual Page 90