Intel 130T User Manual

Intel Express130T Standalone HubUser Guide

8Connecting to a switchConnecting hubs to a switch, such as the Intel Express 510T Switch,allows you to extend your network topology. The cable length

9TroubleshootingSymptoms and solutionsMost problems with the Express 130T Standalone Hub are caused byincorrect cabling. If you have problems connecti

10Cabling RequirementsStraight-through vs. crossover cablesPorts 1-8 on the Express 130T Standalone Hub are wired MDI-X(indicated by the ‘x’ next to t

11Testing a cableHere’s an easy way to test the link integrity of a cable:1 Plug one end of the cable into the Daisy-chain port.2 Plug the other end o

12Limited Hardware WarrantyIntel warrants to the original owner that the hardware product delivered in this package will be free from defects in mater

13Limited Hardware Warranty (Europe only)Intel warrants to the original owner that the hardware product delivered in this package will be free from de

14Regulatory informationFederal Communications Commission (FCC) StatementThis equipment has been tested and found to comply with the limits for a Clas

15WARNUNGDas System wurde für den Betrieb in einer normalen Büroumgebung entwickelt. Der entwickelt. Der Standort sollte:· sauber und staubfrei sein (

World Wide Web & Internet FTP Intel BBSAccess Intel’s World Wide Web home page Use Intel’s Bulletin Board. Dial in byor download information using

Year 2000 CapableAn Intel product, when used in accordance with its associated documentation, is "Year 2000 Capable" when, upon installation

12345Blink = Activity Orange = AutodisabledSpeed100101Quick StartInstall the hubPlace the hub on a shelf or table, thenplug the power supply into the

2Frequently asked questionsDoes each port operate at 10Mbps or 100Mbps?Yes. Each port on the Express 130T Standalone Hub is capable of10Mbps or 100Mbp

3OverviewThe Intel Express 130T Standalone Hub is an 8-port hub that operatesat 10 or 100Mbps.• All ports on the hub are capable of 10 or 100Mbps half

4Connection GuidelinesYou can connect the Intel Express 130T Standalone Hub to variousPCs, switches, routers, servers, and print servers running at ei

5LED IndicatorsThe LEDs on the front of the hub indicate the status of each port aswell as the overall condition of the hub.LED Color MeaningPower Gre

6You can connect the Express130T Standalone Hub to a100Mbps hub that supportsdaisy-chaining.Connecting to Hubs andSwitchesConnecting to another 130T h

7Do not connect the Express 130T Standalone Hub to a 100Base-T ClassI hub, such as the Express 10/100 Stackable Hub.Don’t connect the Express130T Stan